MeldaProduction Plugin Kernel technlogy, which means lower memory & CPU usage (often -50%), faster loading and much more. The more MeldaProduction plugins you use, the more they can share the resources and optimize your CPU usage. The plugins now communicate with each other, use advanced smart resource sharing algorithms, all of them (almost 80 plugins) fit in a 100MB installer (including all resources, both 32-bit and 64-bit), and for a complete installation they take just about 100MB for both 32-bit & 64-bit, VST & VST3 & AU & AAX.
New smart interpolation kernel, which smoothes parameter changes via GUI/modulation/automation/MIDI to get near-perfect audio quality (if physically possible), sample accuracy and minimum CPU requirements.
Added smart bypass cross-fading and full bypass latency handling, which ensures bypass will always be in time seemless operation for a perfect comparison workflow.
Modulators heavily redesigned - added an extremely powerful metering system to follower & envelope modes, Envelope audio-detector mode has been completely redesigned to provide a great response and versatility, added pitch & transient detection mode for follower/envelope mode in modulators.
Added global Undo/Redo features storing all automatable parameters, presets and randomizer. Note that certain "deep" non-automatable parameters are not available for undo.
New Online Preset Exchange accessible directly from each preset window, which now submits one of your presets in exchange for the whole online database, to support community preset sharing. This replaces the previous preset exchange, which didn't work simply because most users didn't submit any presets. Now you have to submit a preset each time you want to download the preset database. The exchange is not monitored anymore, since we assume you will be submitting only reasonable presets. Only commercial users can use this feature. Please submit only reasonable presets or you will be banned.
Added free MRatio plugin.
Added a powerful Formant A-E-I-O-U filter to MWobbler.
Reoptimized for the newest processors.
Added Fast parameter to MAutoVolume, which controls speed of the background detector.
Added ability to disabled prefiltering band-pass filters to MDrumLeveler.
Added Side-chain modes to MDrumLeveler which makes it use side-chain to remove or allow events.
Added ability to store presets in all time-graph settings.
Added band-pass disable and ability to audition mid/side to MCompare.
Added Favourite paths feature to all file dialogs and selectors.
Added band RMS length & Hold to MAutoDynamicEq and MDynamicEq.
Multiband plugins now have "disabled crossover" option, which can be used to process all of the bands in parallel without crossover filtering.
Added ADSR tempo sync feature, which lets the delay/attack/hold/decay/release segments become length of a straight note/triplet according to current tempo.
MCompare file & source buttons can now be renamed, panels with files & sources can be hidden.
Added modulators to MSpectralDynamics, MDynamics, MMultiBandDynamics and MMultiBandLimiter.
Added +3dB (AES-17) option to all crest meters.
Added Diff feature to MSpectralDynamics, MEqualizerLinearPhase, MAutoEqualizerLinearPhase and MFreeformEqualizer.
Transformation and amplitude transformation of all oscillator shapes can now be automated/modulated.
Most popup windows are now displayed nonmodally, so you can have them all visible at once.
Added Areas and Collision threshold to MMultiAnalyzer.
Added fine-tuning mode using ctrl key to all line graphs in MSpectralDynamics, MDrumLeveler, MCompare, MDynamics, MMultiBandDynamics and MModernCompressor.
Added ability to audition difference between selected source/file and main input to MCompare.
Multiband plugins now have switches to control which parameters global dry/wet affects - global input/output gains and band gain and panorama.
MDrumLeveler threshold max is now used only if lower than 0dB.
MMultiBandGranular has now 4 voices for each band.
MCompare now warns if multiple instances are set to generate the same source.
Set buttons in MCompare now don't change the target gain until the loudness estimate is accurate enough.
Added customisable graying for inactivate windows, which makes it easier to recognize active windows.
Improved multicolumn listbox behaviour (in presets for example).
Copy & paste (all of them) is now copied as text, so you can easily use this to send settings over email for example.
Automation commands in ProTools such as ctrl+alt+cmd+click are now supported for most parameters.
Added AGC to MDynamicsLimiter, MMultiBandLimiter and MUltraMaximizer, useful to check for the differences in the limited signal.
Editors with tabs now remember selected tab.
Surround support is now enabled by default for all interfaces except for VST2.
Right-clicking in the sample view in MCompare now sets the playback position when sync is not enabled.
MCompare file sync delay extended to -60 minutes..+60 minutes.
Added band selection arrows to all multiband plugins.
Fix: Some hosts could crash equalizers with analyzers when switched to Left & right mode.
Fix: MMultiAnalyzer did freeze in PT as audiosuite.
Fix: Parametric equalizers could stop functioning correctly when a band got dragged beyond 20kHz.
Fix: MReverb & MMultiBandReverb predelay wasn't working correctly.
Fix: MMultiBandChorus didn't work correctly for depth above 100%.
Fix: MCompressor did cause artifacts when linear knee was used and output gain was not 0dB.
Fix: MSpectralDynamics didn't report look-ahead latency.
Fix: MCompare could produce looping glitches when used in sync mode outside of the range of the input file.
Fix: Text input for sync delay in MCompare didn't work properly.
Fix: MLoudnessAnalyzer didn't show peak meter units until the first processing restart.
Fix: MRhythmizer and MMultiBandRhythmizer were needlessly sending sequence parameters all the time when playback was inactive in "one shot" modes.
Fix: MIDI note controller attached to certain parameters could cause a crash when played the lower MIDI notes.
Fix: MCompare could cause zipper noise with AGC and specific comparison signals.
Fix: Some windows were incorrectly decreasing their size when certain panels have been collapsed.
Fix: Width meter didn't work correctly when loudness prefiltering has been enabled.
Fix: Overriden the fatal bug in Bitwig, where this host send invalid data to VST plugins after a plugin with latency.
Fix: The plugins now override a bug present in a few hosts, which closes style settings after a style has been changed.
Fix: MCompare didn't load files for slots when changing presets.
Fix: MAutoAlign was causing audio overload after analysis in some hosts (mainly ProTools).
Fix: MReverb and MMultiBandReverb could start self-oscillating in very specific settings.
Fix: When learning/automating ADSR/oscillator parameters, not only the actually changed parameters have been sent/learned.
Fix: MCompare file selector now doesn't go to the root if there is no file loaded yet.