Reverberate

Category Audio Production / Plug-ins & effects
Version 1.913
Format AAXNAURTASVST
Compatibility ReverberateMacOS X Intel
Licence Commercial Software
Price $50  /  40€
Rating
Updated On Jun 15, 2014
Total Downloads 2,254
Mac Downloads 1,576
Category Audio Production / Plug-ins & effects
Version 1.913
Format AAXNRTASVST
Compatibility ReverberateWindows
Licence Commercial Software
Price $50  /  40€
Rating
Updated On Jun 15, 2014
Total Downloads 2,254
PC Downloads 678

Convolution reverb

LiquidSonics' Reverberate is a highly efficient convolution audio processor offering true zero-latency operation for two separate, stereo impulse responses.

Reverberate seeks to provide a richer and more dynamic sounding reverb from impulse responses by optionally modulating an amalgamation of two, separately controllable IRs using an LFO. Further modulation is possible using the post-processing effects; an all-pass interpolator chorus provides a fuller sound and an over-sampled analogue prototype paragraphic equaliser is provided with dual LFOs. These features make for a livelier sound than typically associated with some convolution reverbs, at a very competitive price.
Features and Specifications:

* Stereo convolution reverb
* Dual IR for true-stereo capability
* Zero...
more...
LiquidSonics' Reverberate is a highly efficient convolution audio processor offering true zero-latency operation for two separate, stereo impulse responses.

Reverberate seeks to provide a richer and more dynamic sounding reverb from impulse responses by optionally modulating an amalgamation of two, separately controllable IRs using an LFO. Further modulation is possible using the post-processing effects; an all-pass interpolator chorus provides a fuller sound and an over-sampled analogue prototype paragraphic equaliser is provided with dual LFOs. These features make for a livelier sound than typically associated with some convolution reverbs, at a very competitive price.
Features and Specifications:

* Stereo convolution reverb
* Dual IR for true-stereo capability
* Zero latency (or select up to 8192 samples latency)
* Wav, Aiff and Flac support
* ADSHR envelopes
* 50%-150% stretch
* Double oversampled IR-EQ
* Pre-delay up to 500ms
* Linear-interpolation chorus
* Post EQ with LFO modulation
less...
Windows XP, Windows Vista or Windows 7 64-bit version requires a 64-bit OS and a 64-bit host
Reverberate Reverberate v 1.913 Jun 15, 2014 MacOS X Intel
VST/AU: Improved support in WaveLab.
LiquidSonics Reverberate Reverberate v 1.911 Mar 7, 2014 MacOS X Intel
  • All: Additional filetype support.

  • AU: An additional fallback AU implementation for hosts incompatible with the regular AU is now selectable in the installer.
  • LiquidSonics Reverberate v 1.910 Feb 4, 2014 MacOS X Intel
  • All: Optimisations for additional CPUs and instruction sets.

  • OS X: Improved support within Renoise 3 and Digital Performer 8.
  • convolution Reverberate v 1.900 Jan 6, 2014 MacOS X Intel
    All: New SplitMod feature to provide modulating delay spin-wander type effects to the early and late components of an IR.
    reverb Reverberate v 1.822 Dec 1, 2013 MacOS X Intel
  • All: Reduced the impact of an audible click artefact when changing presets using delays and choruses.

  • All: Improved support within Audition.
  • using Reverberate v 1.821 Oct 28, 2013 MacOS X Intel
  • AU: Crash fix for some x64 hosts due to window closure management.

  • AU: Fix for an issue where the plugin could start in a bypass state in some hosts.
  • features Reverberate v 1.820 Aug 30, 2013 MacOS X Intel
  • VST/AU: The reverb tail can now be flushed using MIDI-CC automation.
  • modulation Reverberate v 1.810 Aug 20, 2013 MacOS X Intel
  • All: Pro Tools 10.3.5 and Pro Tools 11 AAX support added for Mac and PC (32-bit and 64-bit included).

  • All: Refreshed the classic grey and green interface.

  • All: Added a new Neon Blue skin.

  • All: Many parameter values can now be edited via text entry for absolute precision.

  • All: Recursive folder search for lost files feature added, items are specified in the Preset tab menu.

  • All: Categorised presets are now provided on a drop-down menu in the presets tab.

  • All: Included presets from OpenAirLib.net.

  • All: Added IR1-IR2 mix gain control for mid-point level control enabling smoother IR transitions.

  • All: Update for frequency selection bug in filters at rates other than 44.1 kHz in host independent mode.

  • All: Demo 30-day counter reset to allow everybody to try the new features.
  • download Reverberate v 1.800 Jun 6, 2013 MacOS X Intel
  • All: Pro Tools 10.3.5 and Pro Tools 11 AAX support added for Mac and PC (32-bit and 64-bit included).

  • All: Refreshed the classic grey and green interface.

  • All: Added a new Neon Blue skin.

  • All: Many parameter values can now be edited via text entry for absolute precision.

  • All: Recursive folder search for lost files feature added, items are specified in the Preset tab menu.

  • All: Categorised presets are now provided on a drop-down menu in the presets tab.

  • All: Included presets from OpenAirLib.net.

  • All: Added IR1-IR2 mix gain control for mid-point level control enabling smoother IR transitions.

  • All: Update for frequency selection bug in filters at rates other than 44.1 kHz in host independent mode.

  • All: Demo 30-day counter reset to allow everybody to try the new features.
  • mac Reverberate v 1.776 Nov 16, 2012 MacOS X Intel
  • Mac: Fix for initial dialog box folder location preference.

  • Mac: Additional fix for license file registration.
  • more...
    windows Reverberate v 1.775 Nov 5, 2012 MacOS X Intel
  • All: 192kHz operation fix when loading empty presets.

  • Mac: Fix for file license file registration window bug in OS X 10.8.x
  • macintosh Reverberate v 1.774 Sep 27, 2012 MacOS X Intel
  • All: Bugfix for IR2 early reflections module.
  • pc Reverberate v 1.773 May 25, 2012 MacOS X Intel
    1.773: 22/05/12
  • Mac: Demo mode not starting correctly bug-fix.


  • 1.772: 22/05/12
  • All: File browser back button now permanently visible.

  • Mac: File locations are now resiliant to volume name changes.
  • Reverberate v 1.770 May 15, 2012 MacOS X Intel
  • All: Added IR1 EQ and IR2 EQ sheen control for adding synthetic high frequency content and presence.

  • All: Fixed IR2 views not obeying multiple visualisation setting.
  • Reverberate v 1.761 May 2, 2012 MacOS X Intel
  • All: Fix for dial operation mode in some hosts changing after the plugin is closed and re-opened.

  • All: Delays do not update if inactive saving CPU in projects with automated tempo changes.
  • Reverberate v 1.760 Apr 15, 2012 MacOS X Intel
  • PC: Mouse wheel now supported in more hosts.

  • All: IR view can now show individual IR channels (activated in the settings tab under IR Visualisation).
  • Reverberate v 1.753 Mar 27, 2012 MacOS X Intel
  • PC: Fixed a problem with the wrong preset number being loaded in Pyramix.
  • Reverberate v 1.752 Feb 22, 2012 MacOS X Intel
  • PC: Update to fix a problem when used in Sound Forge where a render was not applied to the start of the audio.

  • All: Holding the alt keyboard button while clicking the EQ handle toggles the filter type.
  • Reverberate v 1.751 Jan 31, 2012 MacOS X Intel
  • All: Mouse wheel support for changing filter bandwidth in the EQ visualisation window.

  • All: Updated OS detection to support Wine (XP simulation is required for Wine users).
  • Reverberate v 1.750 Jan 20, 2012 MacOS X Intel
    1.750: 19/01/12
  • All: Drag and drop support for IR files dropped into the IR visualisation area.


  • 1.742: 15/01/12
  • PC: Improved appearance of EQ handles on Windows XP.


  • 1.741: 09/01/12
  • VST: When loading an individual preset (fxp) file the current program number was changed incorrectly.


  • 1.740: 08/01/12
  • All: Added EQ handles that can be dragged to change gain and frequency.
  • Reverberate v 1.730 Jan 6, 2012 MacOS X Intel
  • All: Smoother rendering of ADSHR, filter curves and IRs (applies to Mac and Windows editions newer than XP).
  • Reverberate v 1.720 Sep 30, 2011 MacOS X Intel
  • All: Added a function to create a bank of presets based on the currently loaded preset by incrementing the current IR in the directory for each iteration.

  • All: Fix for a crash during heavy automation.
  • Reverberate v 1.704 Jun 18, 2011 MacOS X Intel
    Fix for clipping audio files where input values are outside the standard -1.0 to 1.0 floating point range.
    Reverberate v 1.691 May 3, 2011 MacOS X Intel
  • All: The IR1 and IR2 settings can now be swapped, this is useful when IRs are chained.

  • All: The IR browser now defaults to the previous location when the editor is closed and re-opened within a session.

  • All: Updated sound file library to incorporate bug fixes.
  • Reverberate v 1.690 Apr 2, 2011 MacOS X Intel
  • All: Added the capability to apply the master modulation of IR1/2 pan and mix pre or post convolution (previously only post convolution was possible).
  • Reverberate v 1.687 Mar 21, 2011 MacOS X Intel
    1.687: 17/03/11
  • All: Additional tail generator tints added (cathedral, stone church, bright chapel and deep chapel).

  • All: Added 8 new tail generator presets using the new tints.

  • All: The copy and paste facility for presets now works after the editor is closed and re-opened.



  • 1.686: 11/03/11
  • All: Graphical fixes.

  • Mac: AU, VST and RTAS can now be installed independently.
  • Reverberate v 1.685 Feb 28, 2011 MacOS X Intel
  • All: Added a new IR type to generate synthetic IR tails.

  • All: Added 16 new presets utilising the tails generator.

  • OS X: Audio Unit update enabling 64-bit support (the old 32-bit version can optionally be installed using the installer customise option).

  • All: Memory is freed when IRs are inactive considerably reducing memory consumption in a single IR scenario.

  • All: Added an option to modulate the IRxEQs using a decaying exponential.

  • All: Changed the IRxEQs modulation view to be linear to more clearly visualise the decaying exp and linear behaviour.

  • All: Smoother audio during program changes.

  • All: More descriptive errors on registry or preferences file loading failures.

  • All: Fixed a bug in the delay unit that caused a feint distortion effect when different delays were set per channel.

  • All: Modification to enable full recall from chunk (assists full recall in Usine host).

  • All: More accurate reporting of the IR tail length to the host (assists Wavelab mixdowns).

  • All: Corrected focus bug in filters.

  • PC x64: Installer provides an option to use the same plug-in ID as the 32-bit version.
  • Reverberate v 1.681 Feb 9, 2011 MacOS X Intel
    1.681 [Public Beta]:
  • All: Additional tail room tint models with true stereo capability.

  • All: Reduced memory consumption when IRs are inactive.
  • Reverberate v 1.679 Jan 28, 2011 MacOS X Intel
    1.679 [Public Beta]:
  • All: Removed exponent option from IRxEQ modulation and changed log behaviour to be dependent on direction.

  • All: Changed IRxEQ modulation view to be linear to more clearly visualise the log and linear behaviour.

  • All: Corrected IR2 width operation when in mono position.
  • Reverberate v 1.675 Jan 23, 2011 MacOS X Intel
    1.675 [Public Beta]:
  • All: Added a new IR type to generate synthetic IR tails.

  • OS X: Audio Unit update enabling 64-bit support.

  • PC x64: Installer provides an option to use the same plug-in ID as the 32-bit version.

  • All: Modification to enable full recall from chunk (assists full recall in Usine host).

  • All: More descriptive low memory condition error messages.
  • Reverberate v 1.660 Dec 4, 2010 MacOS X Intel
  • All: Added the capability to assign up to 2 MIDI controllers (MIDI-CC) to some common Reverberate parameters for enhanced modulation capabilities in MIDI performance scenarios. Midi data must be routed to Reverberate via the host application (not all hosts are able to do this).
  • Reverberate v 1.650 Nov 15, 2010 MacOS X Intel
  • All: Master wet lock icon added.

  • All: Changed the wet lock options to include a default insert mode, send mode, or as specified per bank as wet-lock is now saved in the preset banks allowing for banks to be configured as send banks.

  • All: The presets view now opens by default instead of the IR browser.
  • Reverberate v 1.630 Nov 2, 2010 MacOS X Intel
  • All: Filter frequencies can now be selected from A0 - G#8 using pulldown menus providing a very natural and musical frequency selection approach.
  • Reverberate v 1.620 Oct 21, 2010 MacOS X Intel
  • Mac: 64-bit VST added to the plug-in binary (a 64-bit AU is not yet available). The 64-bit VST will load automatically in hosts supporting 64-bit plug-ins.

  • Mac: Audio file library speed optimisations for reduced start-up and audio file access times.
  • Reverberate v 1.614 Oct 9, 2010 MacOS X Intel
  • All: Control+click on post IR gain controls now resets the slider positions as well as the parameter value.
  • Reverberate v 1.612 Sep 28, 2010 MacOS X Intel
  • OS X: Improved support for system volume names containing diacritics.
  • Reverberate v 1.611 Sep 16, 2010 MacOS X Intel
  • All: The demo timers have been reset so that all expired demos may now run for a further 30 days to enable past demo users to try all the new features added in recent releases.

  • All: Increased stability when system memory is depleted.
  • Reverberate v 1.610 Sep 15, 2010 MacOS X Intel
  • All: Reduced memory consumption of the early reflections module.

  • All: The EQ states automatically enable when an EQ parameter is modified.

  • All: Fixed initial values for the stereo wideners where saves were made using version 1.506 (previous saves work as expected).
  • Reverberate v 1.600 Sep 12, 2010 MacOS X Intel
  • All: Native RTAS x86 support.

  • All: New early reflections reverb module incorporating virtual point source generation models.

  • All: New stereo widener for each IR.

  • All: 64 new true stereo impulse responses.

  • All: Two additional preset banks utilising the new true stereo IRs and the early reflections module.

  • All: New consolidated EQ views for IR1, IR2 and post to show all 5 bands on a single tab for quicker EQ editing.

  • All: A mirror of the IR1 and IR2 mixer gain controls on the IR1 and IR2 tabs for convenience during editing and selection.

  • All: Updates to the GUI for increased graphical texturing and a clearer representation of the IR state.

  • All: The IR reverse and normalisation controls have been moved to make space for the additional IR dials.

  • Mac: Fixed impulse response normalisation bug.

  • PC: Improved font rendering.
  • Reverberate v 1.506 Aug 27, 2010 MacOS X Intel
    1.506: 24/08/10
  • All: Fix for directory listings sort order on some systems.


  • 1.505: 13/08/10
  • Mac: Fix for mono AU crash in Ardour on some systems.
  • Reverberate v 1.504 Aug 8, 2010 MacOS X Intel
  • Mac: Fix for /Users/ location some systems with a single volume.
  • Reverberate v 1.503 Aug 7, 2010 MacOS X Intel
    1.503: 01/08/10
  • All: Reduced CPU usage of the delay module when automating the host song tempo with tempo-lock enabled.


  • 1.502: 28/07/10
  • PC: Corrected a bug where the first directory in a drive's root was not displayed in some cases.
  • Reverberate v 1.501 Jul 29, 2010 MacOS X Intel
    1.501: 26/07/10
  • All: Improved lost file search functionality where lost files can be found by back-tracking by one directory level.
  • Reverberate v 1.500 Jun 30, 2010 MacOS X Intel
  • All: New stereo delay modules incorporating delay line modulation and tempo sync added to the IR1, IR2 and master signal paths.

  • All: Some factory default presets have been updated to use the new delay module.
  • Reverberate v 1.417 May 20, 2010 MacOS X Intel
    1.417: 18/05/10
  • All: Processing indicators have been added to all tabs (they were previously only shown on the IR1/IR2 tabs) to show activity during preset changes.

  • All: The currently selected preset number in the radio brower did not always correctly update.

  • All: The post-EQ LFO was incorrectly timed when operating above 44.1kHz.



  • 1.416: 07/05/10
  • All: Fixed an issue with the VST-RTAS beta period expiration date preventing the demo from running correctly under the VST-RTAS wrapper.

  • OS X: Better handling of lost file user interaction mechanisms.
  • Reverberate v 1.415 May 7, 2010 MacOS X Intel
  • OS X: An additional default search path is included for /Library/Audio/Impulse Responses/LiquidSonics/Reverberate/Factory-flac/ so if the flac compatibility presets package is installed it is not necessary to update all song files with the new location for the old flac files.
  • Reverberate v 1.414 May 2, 2010 MacOS X Intel
  • OS X: Presets files now stored in `/Library/Audio/Impulse Responses/LiquidSonics` to follow the typical Mac convention.
  • Reverberate v 1.413 Apr 30, 2010 MacOS X Intel
  • All: Increased maximum IR length.

  • OS X: Presets files now stored in `/Library/Audio/Impulse Responses/LiquidSonics` to follow the typical Mac convention.

  • OS X: Default presets now use wav instead of flac due to compatibility issues on some Macs. Links to the previous flac files are provided on the website support page.
  • Reverberate v 1.412 Apr 20, 2010 MacOS X Intel
  • OS X AU: Some hosts did not correctly restore the correct program in a bank when a song/project file is loaded. This is fixed in saves from this version and beyond though any old saves will still exhibit the incorrect behaviour in affected hosts.
  • Reverberate v 1.410 Apr 14, 2010 MacOS X Intel
  • All: Added a new modulation capability to IR1's EQ and IR2's EQ to allow start-end sliding EQ configurations for changing the frequency and gain of all 5 bands of equalisation independently.

  • All: Added the capability to vary envelope attack, decay and release shapes from linear (old default) to log or exponent.

  • All: Impulse Response viewer now reflects EQ changes.

  • All: Fixed the initial position of file browser when loading an FXP file from the host.

  • All: VST-RTAS beta period extended by 1 month to expire 01/05/2010.

  • All: Changes for the worker thread priorities when operating in the VST-RTAS wrapper to reduce CPU starvation when under high system load.

  • All: Fix for IR1-B and IR2-B (second part of true stereo pairs) which were not correctly filtered by IR1 EQ and IR2 EQ.
  • Reverberate v 1.402 Feb 28, 2010 MacOS X Intel
  • All: Added a stereo to mono conversion capability for the IR1, IR2 and Master mixer sections (accessed via topology view).

  • All: Auto-pairing of short file names did not work, now fixed.

  • All: Added support for Mono-Mono and Mono-Stereo modes of operation under the FXpansion VST-RTAS wrapper to allow use on mono tracks.

  • All: Upon detection of the first run of Reverberate under the VST-RTAS wrapper a dialogue is shown to recommend reducing the host processors to one below the maximum (this increases performance of multi-threaded VST plug-ins under PT).

  • OS X: AU has reduced CPU consumption when operating in non-zero latency modes.

  • OS X: Further changes to fix an installer permissions fault.
  • Reverberate v 1.401 Feb 22, 2010 MacOS X Intel
  • All: An option to chain output of IR1 into IR2 has been added into the mixer.

  • All: The plug-in now detects input silences longer than the length of the longest IR currently in use and automatically bypasses processing to conserve CPU.

  • All: Improved compatability with FXpansion's RTAS-VST wrapper.

  • OS X: AU now supports delay compensated increased latency modes for CPU conservation.
  • less...
    Reverberate Reverberate v 1.913 Jun 15, 2014 Windows
    VST/AU: Improved support in WaveLab.
    LiquidSonics Reverberate Reverberate v 1.911 Mar 7, 2014 Windows
  • All: Additional filetype support.

  • AU: An additional fallback AU implementation for hosts incompatible with the regular AU is now selectable in the installer.
  • LiquidSonics Reverberate v 1.910 Feb 4, 2014 Windows
  • All: Optimisations for additional CPUs and instruction sets.

  • OS X: Improved support within Renoise 3 and Digital Performer 8.
  • convolution Reverberate v 1.900 Jan 6, 2014 Windows
    All: New SplitMod feature to provide modulating delay spin-wander type effects to the early and late components of an IR.
    reverb Reverberate v 1.822 Dec 1, 2013 Windows
  • All: Reduced the impact of an audible click artefact when changing presets using delays and choruses.

  • All: Improved support within Audition.
  • using Reverberate v 1.821 Oct 28, 2013 Windows
  • AU: Crash fix for some x64 hosts due to window closure management.

  • AU: Fix for an issue where the plugin could start in a bypass state in some hosts.
  • features Reverberate v 1.820 Aug 30, 2013 Windows
  • VST/AU: The reverb tail can now be flushed using MIDI-CC automation.
  • modulation Reverberate v 1.810 Aug 20, 2013 Windows
  • All: User definable favourite banks feature added.
  • download Reverberate v 1.800 Jun 6, 2013 Windows
  • All: Pro Tools 10.3.5 and Pro Tools 11 AAX support added for Mac and PC (32-bit and 64-bit included).

  • All: Refreshed the classic grey and green interface.

  • All: Added a new Neon Blue skin.

  • All: Many parameter values can now be edited via text entry for absolute precision.

  • All: Recursive folder search for lost files feature added, items are specified in the Preset tab menu.

  • All: Categorised presets are now provided on a drop-down menu in the presets tab.

  • All: Included presets from OpenAirLib.net.

  • All: Added IR1-IR2 mix gain control for mid-point level control enabling smoother IR transitions.

  • All: Update for frequency selection bug in filters at rates other than 44.1 kHz in host independent mode.

  • All: Demo 30-day counter reset to allow everybody to try the new features.
  • mac Reverberate v 1.776 Nov 16, 2012 Windows
  • Mac: Fix for initial dialog box folder location preference.

  • Mac: Additional fix for license file registration.
  • more...
    windows Reverberate v 1.775 Nov 5, 2012 Windows
  • All: 192kHz operation fix when loading empty presets.

  • Mac: Fix for file license file registration window bug in OS X 10.8.x
  • macintosh Reverberate v 1.774 Sep 27, 2012 Windows
  • All: Bugfix for IR2 early reflections module.
  • pc Reverberate v 1.773 May 25, 2012 Windows
    1.773: 22/05/12
  • Mac: Demo mode not starting correctly bug-fix.


  • 1.772: 22/05/12
  • All: File browser back button now permanently visible.

  • Mac: File locations are now resiliant to volume name changes.
  • Reverberate v 1.770 May 15, 2012 Windows
  • All: Added IR1 EQ and IR2 EQ sheen control for adding synthetic high frequency content and presence.

  • All: Fixed IR2 views not obeying multiple visualisation setting.
  • Reverberate v 1.761 May 2, 2012 Windows
  • All: Fix for dial operation mode in some hosts changing after the plugin is closed and re-opened.

  • All: Delays do not update if inactive saving CPU in projects with automated tempo changes.
  • Reverberate v 1.760 Apr 15, 2012 Windows
  • PC: Mouse wheel now supported in more hosts.

  • All: IR view can now show individual IR channels (activated in the settings tab under IR Visualisation).
  • Reverberate v 1.753 Mar 27, 2012 Windows
  • PC: Fixed a problem with the wrong preset number being loaded in Pyramix.
  • Reverberate v 1.752 Feb 22, 2012 Windows
  • PC: Update to fix a problem when used in Sound Forge where a render was not applied to the start of the audio.

  • All: Holding the alt keyboard button while clicking the EQ handle toggles the filter type.
  • Reverberate v 1.751 Jan 31, 2012 Windows
  • All: Mouse wheel support for changing filter bandwidth in the EQ visualisation window.

  • All: Updated OS detection to support Wine (XP simulation is required for Wine users).
  • Reverberate v 1.750 Jan 20, 2012 Windows
    1.750: 19/01/12
  • All: Drag and drop support for IR files dropped into the IR visualisation area.


  • 1.742: 15/01/12
  • PC: Improved appearance of EQ handles on Windows XP.


  • 1.741: 09/01/12
  • VST: When loading an individual preset (fxp) file the current program number was changed incorrectly.


  • 1.740: 08/01/12
  • All: Added EQ handles that can be dragged to change gain and frequency.
  • Reverberate v 1.730 Jan 6, 2012 Windows
  • All: Smoother rendering of ADSHR, filter curves and IRs (applies to Mac and Windows editions newer than XP).
  • Reverberate v 1.720 Sep 30, 2011 Windows
  • All: Added a function to create a bank of presets based on the currently loaded preset by incrementing the current IR in the directory for each iteration.

  • All: Fix for a crash during heavy automation.
  • Reverberate v 1.704 Jun 18, 2011 Windows
    Fix for clipping audio files where input values are outside the standard -1.0 to 1.0 floating point range.
    Reverberate v 1.691 May 3, 2011 Windows
  • All: The IR1 and IR2 settings can now be swapped, this is useful when IRs are chained.

  • All: The IR browser now defaults to the previous location when the editor is closed and re-opened within a session.

  • All: Updated sound file library to incorporate bug fixes.
  • Reverberate v 1.690 Apr 2, 2011 Windows
  • All: Added the capability to apply the master modulation of IR1/2 pan and mix pre or post convolution (previously only post convolution was possible).
  • Reverberate v 1.687 Mar 21, 2011 Windows
    1.687: 17/03/11
  • All: Additional tail generator tints added (cathedral, stone church, bright chapel and deep chapel).

  • All: Added 8 new tail generator presets using the new tints.

  • All: The copy and paste facility for presets now works after the editor is closed and re-opened.



  • 1.686: 11/03/11
  • All: Graphical fixes.

  • Mac: AU, VST and RTAS can now be installed independently.
  • Reverberate v 1.685 Feb 28, 2011 Windows
  • All: Added a new IR type to generate synthetic IR tails.

  • All: Added 16 new presets utilising the tails generator.

  • OS X: Audio Unit update enabling 64-bit support (the old 32-bit version can optionally be installed using the installer customise option).

  • All: Memory is freed when IRs are inactive considerably reducing memory consumption in a single IR scenario.

  • All: Added an option to modulate the IRxEQs using a decaying exponential.

  • All: Changed the IRxEQs modulation view to be linear to more clearly visualise the decaying exp and linear behaviour.

  • All: Smoother audio during program changes.

  • All: More descriptive errors on registry or preferences file loading failures.

  • All: Fixed a bug in the delay unit that caused a feint distortion effect when different delays were set per channel.

  • All: Modification to enable full recall from chunk (assists full recall in Usine host).

  • All: More accurate reporting of the IR tail length to the host (assists Wavelab mixdowns).

  • All: Corrected focus bug in filters.

  • PC x64: Installer provides an option to use the same plug-in ID as the 32-bit version.
  • Reverberate v 1.681 Feb 9, 2011 Windows
  • All: Additional tail room tint models with true stereo capability.

  • All: Reduced memory consumption when IRs are inactive.
  • Reverberate v 1.679 Jan 28, 2011 Windows
    1.679 [Public Beta]:
  • All: Removed exponent option from IRxEQ modulation and changed log behaviour to be dependent on direction.

  • All: Changed IRxEQ modulation view to be linear to more clearly visualise the log and linear behaviour.

  • All: Corrected IR2 width operation when in mono position.
  • Reverberate v 1.675 Jan 23, 2011 Windows
    1.675 [Public Beta]:
  • All: Added a new IR type to generate synthetic IR tails.

  • OS X: Audio Unit update enabling 64-bit support.

  • PC x64: Installer provides an option to use the same plug-in ID as the 32-bit version.

  • All: Modification to enable full recall from chunk (assists full recall in Usine host).

  • All: More descriptive low memory condition error messages.
  • Reverberate v 1.660 Dec 4, 2010 Windows
  • All: Added the capability to assign up to 2 MIDI controllers (MIDI-CC) to some common Reverberate parameters for enhanced modulation capabilities in MIDI performance scenarios. Midi data must be routed to Reverberate via the host application (not all hosts are able to do this).
  • Reverberate v 1.650 Nov 15, 2010 Windows
  • All: Master wet lock icon added.

  • All: Changed the wet lock options to include a default insert mode, send mode, or as specified per bank as wet-lock is now saved in the preset banks allowing for banks to be configured as send banks.

  • All: The presets view now opens by default instead of the IR browser.
  • Reverberate v 1.630 Nov 2, 2010 Windows
  • All: Filter frequencies can now be selected from A0 - G#8 using pulldown menus providing a very natural and musical frequency selection approach.
  • Reverberate v 1.614 Oct 9, 2010 Windows
  • All: Control+click on post IR gain controls now resets the slider positions as well as the parameter value.
  • Reverberate v 1.612 Sep 28, 2010 Windows
  • OS X: Improved support for system volume names containing diacritics.
  • Reverberate v 1.611 Sep 16, 2010 Windows
  • All: The demo timers have been reset so that all expired demos may now run for a further 30 days to enable past demo users to try all the new features added in recent releases.

  • All: Increased stability when system memory is depleted.
  • Reverberate v 1.610 Sep 15, 2010 Windows
  • All: Reduced memory consumption of the early reflections module.

  • All: The EQ states automatically enable when an EQ parameter is modified.

  • All: Fixed initial values for the stereo wideners where saves were made using version 1.506 (previous saves work as expected).
  • Reverberate v 1.600 Sep 12, 2010 Windows
  • All: Native RTAS x86 support.

  • All: New early reflections reverb module incorporating virtual point source generation models.

  • All: New stereo widener for each IR.

  • All: 64 new true stereo impulse responses.

  • All: Two additional preset banks utilising the new true stereo IRs and the early reflections module.

  • All: New consolidated EQ views for IR1, IR2 and post to show all 5 bands on a single tab for quicker EQ editing.

  • All: A mirror of the IR1 and IR2 mixer gain controls on the IR1 and IR2 tabs for convenience during editing and selection.

  • All: Updates to the GUI for increased graphical texturing and a clearer representation of the IR state.

  • All: The IR reverse and normalisation controls have been moved to make space for the additional IR dials.

  • Mac: Fixed impulse response normalisation bug.

  • PC: Improved font rendering.
  • Reverberate v 1.506 Aug 27, 2010 Windows
  • All: Fix for directory listings sort order on some systems.
  • Reverberate v 1.503 Aug 7, 2010 Windows
  • All: Reduced CPU usage of the delay module when automating the host song tempo with tempo-lock enabled.
  • Reverberate v 1.502 Jul 29, 2010 Windows
    1.502: 28/07/10
  • PC: Corrected a bug where the first directory in a drive's root was not displayed in some cases.


  • 1.501: 26/07/10
  • All: Improved lost file search functionality where lost files can be found by back-tracking by one directory level.
  • Reverberate v 1.500 Jun 30, 2010 Windows
  • All: New stereo delay modules incorporating delay line modulation and tempo sync added to the IR1, IR2 and master signal paths.

  • All: Some factory default presets have been updated to use the new delay module.
  • Reverberate v 1.417 May 20, 2010 Windows
    1.417: 18/05/10
  • All: Processing indicators have been added to all tabs (they were previously only shown on the IR1/IR2 tabs) to show activity during preset changes.

  • All: The currently selected preset number in the radio brower did not always correctly update.

  • All: The post-EQ LFO was incorrectly timed when operating above 44.1kHz.



  • 1.416: 07/05/10
  • All: Fixed an issue with the VST-RTAS beta period expiration date preventing the demo from running correctly under the VST-RTAS wrapper.

  • OS X: Better handling of lost file user interaction mechanisms.
  • Reverberate v 1.415 May 7, 2010 Windows
  • OS X: An additional default search path is included for /Library/Audio/Impulse Responses/LiquidSonics/Reverberate/Factory-flac/ so if the flac compatibility presets package is installed it is not necessary to update all song files with the new location for the old flac files.
  • Reverberate v 1.414 May 2, 2010 Windows
  • OS X: Presets files now stored in `/Library/Audio/Impulse Responses/LiquidSonics` to follow the typical Mac convention.
  • Reverberate v 1.413 Apr 30, 2010 Windows
  • All: Increased maximum IR length.

  • OS X: Presets files now stored in `/Library/Audio/Impulse Responses/LiquidSonics` to follow the typical Mac convention.

  • OS X: Default presets now use wav instead of flac due to compatibility issues on some Macs. Links to the previous flac files are provided on the website support page.
  • Reverberate v 1.410 Apr 14, 2010 Windows
  • All: Added a new modulation capability to IR1's EQ and IR2's EQ to allow start-end sliding EQ configurations for changing the frequency and gain of all 5 bands of equalisation independently.

  • All: Added the capability to vary envelope attack, decay and release shapes from linear (old default) to log or exponent.

  • All: Impulse Response viewer now reflects EQ changes.

  • All: Fixed the initial position of file browser when loading an FXP file from the host.

  • All: VST-RTAS beta period extended by 1 month to expire 01/05/2010.

  • All: Changes for the worker thread priorities when operating in the VST-RTAS wrapper to reduce CPU starvation when under high system load.

  • All: Fix for IR1-B and IR2-B (second part of true stereo pairs) which were not correctly filtered by IR1 EQ and IR2 EQ.
  • Reverberate v 1.402 Feb 28, 2010 Windows
  • All: Added a stereo to mono conversion capability for the IR1, IR2 and Master mixer sections (accessed via topology view).

  • All: Auto-pairing of short file names did not work, now fixed.

  • All: Added support for Mono-Mono and Mono-Stereo modes of operation under the FXpansion VST-RTAS wrapper to allow use on mono tracks.

  • All: Upon detection of the first run of Reverberate under the VST-RTAS wrapper a dialogue is shown to recommend reducing the host processors to one below the maximum (this increases performance of multi-threaded VST plug-ins under PT).

  • OS X: AU has reduced CPU consumption when operating in non-zero latency modes.

  • OS X: Further changes to fix an installer permissions fault.
  • less...
    LiquidSonics
    Buy Reverberate near Ashburn, US at:

    You must sign-in to post your comment:

    You can signin with your 440Software account (MacMusic, PcMusic, 440TV, 440Forums, 440Software, ...) or via FaceBook, Twitter or Google.

    Other Software by LiquidSonics (3)

    Filtrate
    Equaliser. LiquidSonics Filtrate is an efficient linear phase 5-band stereo parametric audio equaliser for Mac and PC. Features and Specifications: - Linear phase...
    filtrate LE
    Equaliser. LiquidSonics' Filtrate LE provides a linear phase 5-band paragraphic equaliser. It is available in a standard CPU edition and a version taking advantage of...
    Reverberate LE
    Convolution reverb. LiquidSonics' Reverberate LE is a highly efficient convolution audio processor. It is available in a standard CPU edition and a version taking advantage of...
    user
    Welcome visitor:
    Sponsor
    Share