Oxford Inflator

Category Audio Production / Plug-ins & effects
Version 2.0.0
Format AAXDAAXN
Compatibility Oxford InflatorMacOS X Intel
License Commercial Software
Price $170 - $410
144€ - 348€
Rating
Updated On Aug 22, 2013
Total Downloads 3,724
Mac Downloads 2,413
Category Audio Production / Plug-ins & effects
Version 2.0.0
Format AAXDAAXN
Compatibility Oxford InflatorWindows
License Commercial Software
Price $170 - $410
144€ - 348€
Rating
Updated On Aug 22, 2013
Total Downloads 3,724
PC Downloads 1,311

Dynamic Signal Processor

The Inflator is a unique process that can provide an increase in the apparent loudness of almost any programme, without obvious loss of quality or audible reduction of dynamic range, yet avoiding damaging increases in the peak level of the signal. The inflator process can also bring power, presence and warmth to programme material and even provide headroom overload margin above digital maximum with a subtlety and musical character reminiscent of tube systems.

No matter how limited, compressed and crushed your programme may already be the Inflator will provide even more loudness, it will even add volume to a full-scale white noise signal or add musicality to previously clipped signals!

The Inflator was developed in response to requests from mixing and mastering engineers who are...
more...
The Inflator is a unique process that can provide an increase in the apparent loudness of almost any programme, without obvious loss of quality or audible reduction of dynamic range, yet avoiding damaging increases in the peak level of the signal. The inflator process can also bring power, presence and warmth to programme material and even provide headroom overload margin above digital maximum with a subtlety and musical character reminiscent of tube systems.

No matter how limited, compressed and crushed your programme may already be the Inflator will provide even more loudness, it will even add volume to a full-scale white noise signal or add musicality to previously clipped signals!

The Inflator was developed in response to requests from mixing and mastering engineers who are required to compete on the basis of the overall apparent loudness of their final results.

Use the Inflator to produce louder mixes than you thought possible without overloads or compression pumping, or use it to add natural warmth and character to acoustic or jazz mixes.

Use it on single instruments to add presence, softness and depth, or use it on percussion and drum tracks to produce amazing dynamic presence, tightness and volume.
less...
2nd Generation iLok
2nd Generation iLok
Oxford Inflator Oxford Inflator v 2.0.0 Aug 22, 2013 MacOS X Intel
First release in AAX 64-bit format
Sonnox Oxford Inflator Oxford Inflator v 1.0.0 Jul 3, 2012 MacOS X Intel
1. First release in AAX format
Sonnox Oxford Inflator v 2.0 Dec 13, 2011 MacOS X Intel
As well as native compatibility with 64-bit DAWs, the new versions also sport updated graphic interfaces.
inflator Oxford Inflator v 1.6.3 Aug 8, 2010 MacOS X UB
The issues addressed in this release include:
Some Mac users reported problems running the previous v1-6-2 installer - Fixed
signal Oxford Inflator v 1.6.2 Mar 11, 2010 MacOS X UB
1. New format installer
Checks for presence and version of iLok driver.
Checks for presence of iLok with correct licence before allowing plug-in installation.

2. Log file
Installer-Log.txt file created during installation and stored in :
System>Library>Application Support>Sonnox>Install Logs

3. Onboard Preset Manager
Allows users to save .spt format presets, stored in :
System>Library>Application Support>Sonnox>Presets
.spt presets allow users to name and save a preset using the Pro Tools plug-in, and load it on a different platform, eg. AU (Mac) or VST (on either Mac or Windows).
presence Oxford Inflator v 1.5.5 Mar 11, 2010 MacOS X UB
1. AudioSuite metering
Smooth metering implemented for Pro Tools 8 users
dynamic Oxford Inflator v 1.1.0 Oct 20, 2009 MacOS X UB
The issues addressed in this release include:

1. Increased stability in Logic and Digital Performer
Resolves intermittent issues where a plug-in would (i) display a blank screen and/or (ii) could not be closed in a session.

2. New format installer
Checks for presence and version of iLok driver.
Checks for presence of iLok with correct licence before allowing plug-in installation.

3. Log file
Installer-Log.txt file created during installation and stored in :
System>Library>Application Support>Sonnox>Install Logs

New features included in this release include:
Onboard Preset Manager
Allows users to save .spt format presets, stored in :
System>Library>Application Support>Sonnox>Presets .spt presets allow users to name and save a preset using the Audio Units plug-in, and load it on a different platform, eg. VST or RTAS on either Mac or Windows. This technology is due to be released across all platforms shortly.
Oxford Inflator Oxford Inflator v 2.0.0 Aug 22, 2013 Windows
First release in AAX 64-bit format
Sonnox Oxford Inflator Oxford Inflator v 1.0.0 Jul 3, 2012 Windows
1. First release in AAX format
Sonnox Oxford Inflator v 2.0 Dec 13, 2011 Windows
As well as native compatibility with 64-bit DAWs, the new versions also sport updated graphic interfaces.
inflator Oxford Inflator v 1.7.1 Aug 8, 2010 Windows
The issues addressed in this release include:
1. iLok Licence Check
Although normally desirable, it is now possible to bypass the iLok Licence Check process during plug-in installation. This may prove useful where studio staff are preparing for a session before the authorised iLok is available.
Some users have reported issues where the installer will not successfully locate and confirm the required iLok driver version. This feature will allow users to install the plug-in regardless, and afterwards re-install latest iLok drivers from www.ilok.com should this be necessary.
New features included in this release include:
1. 64-bit compatibility
Plug-in now supports DAW's running in 64-bit mode via VST plug-in bridge.
Note : Not compatible with Cubase 5.1 (64-bit) and earlier, Nuendo 4.x (64-bit) and currently not compatible with Sonar 8.x (64-bit)
signal Oxford Inflator v 1.5.4 Aug 8, 2010 Windows
The issues addressed in this release include:
1. Displaying plug-ins in 'plug-in manufacturer name' order shows inconsistent names.
Fixed
New features included in this release include:
1. iLok Licence Check
It is now possible to bypass the iLok Licence Check process during plug-in installation. This may prove useful where studio staff are preparing for a session before the authorised iLok is available.
Some users have reported issues where the installer will not successfully locate and confirm the required iLok driver version. This feature will allow users to install the plug-in regardless, and afterwards re-install latest iLok drivers from www.ilok.com should this be necessary.
2. Smooth Audio Suite metering
Added – Supported in Pro Tools 8.
presence Oxford Inflator v 1.5.4 Mar 11, 2010 Windows
1. Installer bug fix
Installer failed to correctly recognise Interlok drivers under some circumstances – Resolved.
Sonnox
Buy Oxford Inflator online at:
Buy Oxford Inflator near Woodbridge, United States at:

You must sign-in to post your comment:

You can signin with your 440Software account (MacMusic, PcMusic, 440TV, 440Forums, 440Software, ...) or via FaceBook, Twitter or Google.

philou72
version 1.6.2, MacOS X UB
Sympa, mais trop coloré.

Other Software by Sonnox (12)

Oxford DeBuzzer
Audio restoration. - High performance hum and buzz removal using advanced algorithms - Separate Detect and Remove Sections for intuitive workflow - Scalable high resolution FFT...
Oxford DeClicker
Audio restoration. The Oxford DeClicker has three main sections: DePop, DeClick and DeCrackle. These three sections deal with events that are up to 10ms, 3ms and 0.4ms in duration,...
Oxford DeNoiser
Audio restoration. Oxford DeNoiserThe Oxford DeNoiser removes wide-band noise from audio material using a variety of sophisticated techniques. The key to good de-noising lies in...
Oxford Dynamic EQ
Dynamic EQ. Features - 5 bands of the Oxford Type-3 EQ curve which offer proportional-Q, often considered the most musical EQ curve-type - All bands can overlap fluidly...
Oxford Dynamics
Dynamics. The Oxford Dynamics plug-in is modeled on the extremely flexible and capable unit used in the OXF-R3 professional mixing console. Resulting from many years...
Oxford EQ
Equaliser. The EQ plug-in is based on the OXF-R3 EQ section. It is a fully functional 5-band application with selectable shelf settings on LF and HF sections. Additionally,...
Oxford Limiter
Limiter. The Oxford Limiter is a very high quality programme limiter, which employs logarithmic side chain processing, with innovative adaptive timing functionality,...
Oxford Reverb
Reverberation. The Oxford Reverb plug-in is a highly flexible stereo reverberation generator, designed to complement existing Oxford applications in providing the user with the...
Oxford SuprEsser
De-Esser. The Oxford SuprEsser is both a very highly-featured professional De-Esser and a Dynamic EQ. There is a simple mode for quick fixes, but also an advanced mode for...
Oxford TransMod
Transient Modulator. The Oxford TransMod is a TDM, RTAS or Audiosuite plug-in that allows dynamic level of signals to be modified by the transients in the programme material over...
Restore
Restoration Tools. Sonnox Restore is a suite of three plug-ins - Oxford DeClicker, Oxford DeBuzzer and Oxford DeNoiser - designed to accurately restore audio recordings that are...
Sonnox Fraunhofer Pro-Codec
Real-time codec auditioning, encoding and decoding. The Sonnox Fraunhofer Pro-Codec Plug-In is designed for the real-time auditioning, encoding and decoding of audio signals using Fraunhofer codecs. In the past...
user
Welcome visitor:
Sponsor
Share